Gasket is mainly used in electronic instruments, mold manufacturing, precision machinery, hardware parts, mechanical parts, stamping parts, hardware manufacturing.
Gasket is mainly used in electronic instruments, mold manufacturing, precision machinery, hardware parts, mechanical parts, stamping parts, hardware manufacturing. Gasket can be used to solve the maintenance problem of the machine when the gap of the mold is measured and the phenomenon of shaking, swaying and instability occurs when the machine is aging. The sealing effect of flange connections is also a great use of metal gaskets.
Non-metallic gasket. Non-metallic gaskets are soft, corrosion-resistant and cheap, but have poor temperature and pressure resistance. It is used for flange sealing of medium and low pressure vessels or pipelines at normal and medium temperature. Non-metallic gaskets include rubber gaskets, asbestos gaskets, asbestos rubber gaskets, flexible graphite gaskets and polytetrafluoroethylene gaskets.
① Rubber plate. The main materials for making rubber gasket are natural rubber, nitrile rubber, neoprene rubber, etc. In addition, fluorine rubber and other special rubber have also begun to be used. Rubber is widely used in the sealing of containers and pipelines because of its dense organization, soft texture, good resilience, easy to shear into various shapes, cheap, easy to buy and other characteristics, but it is not resistant to high pressure, easy to dissolve and expand in mineral oil and not corrosion, easy to age at high temperature, lose resilience.
② Asbestos. Asbestos materials are wet asbestos and blue asbestos. Wet asbestos has good heat and alkaline resistance, high tensile strength and poor acid resistance. Most asbestos rubber sheets are made of it. Blue asbestos not only has good heat resistance, but also good acid resistance, so it is often used in the manufacture of acid-resistant asbestos rubber sheets. The normal operating temperature of asbestos board is below 550 degrees. Asbestos tape or rope can be used for large diameter low-pressure vessels. When asbestos rope is used, it is usually impregnated with sodium silicate. Acid, alkali solvents and other media can also use such gaskets.
③ Asbestos rubber sheet. Asbestos rubber sheet is made of asbestos, rubber and filler. General asbestos fiber accounts for 60 -85%. According to its distribution process, performance and use, there are mainly high pressure asbestos rubber board, medium and low pressure asbestos rubber board and oil resistant asbestos rubber board. Asbestos rubber plate has suitable strength, elasticity, softness and other properties, it is convenient and cheap to make gaskets, so it has been rapidly promoted and applied in chemical enterprises.
④ Flexible graphite. Flexible graphite is a novel sealing material, good resilience, softness, temperature resistance, has been rapidly promoted and applied in chemical enterprises.
⑤ Polytetrafluoroethylene (PTFE for short). Polytetrafluoroethylene chemical resistance, heat resistance, cold resistance, oil resistance is superior to plastic, it is not easy to aging, no combustion, water absorption is almost zero. Its dense organization, non-polar molecular structure, used as a gasket, the contact surface can be smooth, the metal flange does not stick. In addition to being corroded by molten alkali metals and fluorine containing elemental gases, it can withstand the corrosion of a variety of acid, alkali, salt and grease solution media.
