Choice of gasket material

Dec 15, 2022

Leave a message

Choice of gasket material 1
  1. NR has good corrosion resistance to weak acid and alkali, salt and chloride solutions, but poor corrosion resistance to oil and solvent, and is not recommended for ozone medium. Recommended operating temperature: -57 ° C to 93 ° C.

  2. CR is a synthetic rubber adapted to resist the corrosion of moderately corrosive acid, base and salt solutions. Good corrosion resistance to commercial oils and fuels. But the corrosion resistance of strong oxidizing acids, aromatic hydrocarbons and chlorinated hydrocarbons is poor. Recommended operating temperature -51 ° C to 121 ° C.



  3. 7

  4. NBR is a synthetic rubber suitable for a wide range of temperatures with good corrosion resistance to oil, solvents, aromatic hydrocarbons, alkaline hydrocarbons, oil and natural gas. Good corrosion resistance to hydroxides, salts and nearly neutral acids. But in strong oxidizing medium, chlorinated hydrocarbons, ketones and lipids its corrosion resistance is poor, recommended operating temperature 51℃~121℃.

  5. Viton is made of binary and ternary fluorine rubber filled with compound, vulcanizing agent by mixing. In addition to excellent heat resistance, medium resistance, and good physical and mechanical properties, but also has low compression permanent deformation, good elasticity and long service life. Fluorine rubber has outstanding heat resistance (200 ~ 250℃), oil resistance, can be used in the manufacture of cylinder liner sealing ring, rubber bowl and rotary lip sealing ring, can significantly improve the service time. Recommended operating temperature: -40 ° C to 232 ° C.


  6. 14

Send Inquiry