| FFKM | NBR | EPDM | VMQ | FVMQ | FKM | |
| Acetone | A | D | A | C | D | D |
| Benzene | A | D | D | D | C | A |
| Ethyl Acetate | A | D | B | B | D | D |
| Formaldehyde | A | C | A | B | D | D |
| Ethane | A | A | D | D | A | A |
| Methanol | A | B | A | A | A | D |
| Chloroform | A | D | C | D | B | B |
| Methyl Formate | A | D | B | - | - | - |
| MEK | A | D | A | D | D | D |
| MIBK | A | D | B | D | D | D |
| Pyridine | A | D | B | D | D | D |
| THF | A | D | C | D | D | D |
| Thionyl Chloride | A | D | C | - | - | B |
| Toluene | A | D | D | D | B | B |
Note：
A means less than 10% swelling (including no swelling), the medium does not have obvious influence on the rubber performance.
B indicates volume swelling rate of 10-20%, the performance of the material is affected to a certain extent, but basically available, only the product life will be shortened.
C indicates that the tolerance of the material to the medium is poor, according to the actual situation to analyze whether it is available
D indicates that the material can not be used in the media environment
